Electr Desktop Liquid Edible Oil Doubl Weigh Fill Drip Coffee Doy Pack Doughnut Double Head Paste Filling Machine Machinery
HomeHome > Products > Weigh Filling Machine > Electr Desktop Liquid Edible Oil Doubl Weigh Fill Drip Coffee Doy Pack Doughnut Double Head Paste Filling Machine Machinery
Electr Desktop Liquid Edible Oil Doubl Weigh Fill Drip Coffee Doy Pack Doughnut Double Head Paste Filling Machine Machinery

Electr Desktop Liquid Edible Oil Doubl Weigh Fill Drip Coffee Doy Pack Doughnut Double Head Paste Filling Machine Machinery

Filling Machine Product Description: LFFM - II filling machine is improved and innovated based on our company's filling
Basic Info
Model NO. LFFM-II SERIES
After-sales Service Online Support
Warranty 1 Year
Type Piston Filling Machine
Automatic Grade Automatic
Material Type Liquid
Filling Valve Head Single-Head
Feed Cylinder Structure Single-Room Feeding
Dosing Device Capacity Cup
Filling Principle Atmospheric Pressure
Packaging Container Lifting Structure Pneumatic Lifting
Structure Rotary
Packaging Bottle
Packaging Material Carton or Wooden Case Package
Model Lffm-II Series
Shape Single Head/Double Heads
Types of Semi-Automatic/Fully Automatic
Filling Range 5-5000ml
Air Pressure 0.4~0.9MPa
Gas 0.1m³/Min
Handling Capacity 1-25 Bottles/Min
Accuracy ±0.5%
Transport Package Carton or Wooden Case Package
Specification 120cmx80cmx40cm
Trademark lanphan
Origin Henan
Production Capacity 1000
Product Description
Filling Machine

Product Description:

LFFM - II filling machine is improved and innovated based on our company's filling machine series and referring to foreign filling machine technology. It has a much simpler and more reasonable structure, higher accuracy and easier operation. Working in an uncharged state, it possesses both the security and humanization, greatly according with the modern enterprises' need. It is suitable for pharmaceutical, daily chemical, food, pesticide and special industries, serving as an ideal equipment to fill ordinary fluids and high viscosity fluids

It is a semi-automatic or fully automatic piston filling machine, with a reasonable structure, small and exquisite model, and simple operation. All pneumatic components adopt the pneumatic elements of FESTO in Germany or AirTac in Taiwan. It works by using the air cylinder to drive the piston for extracting material, using one-way valve to control the material flow and using the magnetic reed switch to control the stroke of the air cylinder for adjusting the filling volume. The parts in contact with materials is made of stainless steel 304 and the shell is made of stainless steel 201, conforming to GMP requirements and having a higher filling accuracy.

Product Advantage:

1. The parts in contact with the materials is made of stainless steel 304 and the shell is made of stainless steel 201. All can also be made of stainless steel 316 as required by customers.

2. All pneumatic components adopt the pneumatic elements of FESTO in Germany or AirTac in Taiwan, with a stable performance and high filling accuracy.

3. The seals adopt silicone rubber (wear resistance, high temperature resistance, acid and alkali resistance, corrosion resistance) and fluorine rubber (wear resistance, strong acid and alkali resistance, strong corrosion resistance).

4. The fully pneumatic device has a better security.

Electr Desktop Liquid Edible Oil Doubl Weigh Fill Drip Coffee Doy Pack Doughnut Double Head Paste Filling Machine Machinery

Application Scenario:

The products is widely used in beverage, oil and vinegar, lubricating oil, toothpaste and cosmetics industry.

Electr Desktop Liquid Edible Oil Doubl Weigh Fill Drip Coffee Doy Pack Doughnut Double Head Paste Filling Machine Machinery

1. Liquid: beverage, fruit juice, fruit-acid drink, sesame oil, wine, soy sauce, vinegar, etc.

2. Paste: It is an ideal filling machine for pesticide, pharmaceutical (gynecological drugs, Compound Dexamethasone Acetate, Erythromycin Ointment, anti-frost cream, etc.), daily chemical (toothpaste, shoe polish, moisturizer, lipstick, etc.), food (sesame sauce, sweet flour sauce, tomato sauce, cream, etc.), chemical (glass adhesive, sealant, white latex, etc.), lubricating oil and special industries.

Product Parameter:

Filling Range5-100ml20-200ml30-500ml100-1000ml500-2500ml1000-5000ml
Air Pressure0.4~0.9Mpa
Gas Consumption0.1m³/min
Handling Capacity1-25 bottles/min
Accuracy±0.5%
Packing Size of Single Head80*30*30100*40*40120*40*40125*43*43
Weight of Single Head25304050
Packing Size of Double Heads80*60*30100*80*35120*80*40125*95*43
Weight of Double Heads40506570

Product Detail:

Use, Maintenance and Installation:

1. It belongs to a semi-automatic or automatic machine, requiring that bottles, bottle mats and bottle caps should be matched with each other.

2. Test the machine with water before starting up to observe if its rotation has any abnormal phenomenon. The material can be fed into operation after being proved normal.

3. It's forbidden to dismount components with too large tools or excessive power in order to avoid damaging components or influencing machine performance.

4. When the machine is adjusted, tighten the loose screws before starting up.

5. Keep the machine clean. It's forbidden to have oil stains, physic liquor or bits of glass on it so as to avoid machine damage. The following must be done:

(1) Remove physic liquor or bits of glass in time during the production.

(2) Before handing over to the next shift, clean the machine surface and each component once, and add the clean lubricating oil into each moving part.

(3) Thoroughly clean the machine every week, especially dead corners. Or blow it with compressed air.

Disinfection and Cleaning:

1. Loosen the upper and lower fastening screws and remove the liquid injection components to do the overall disinfection and cleaning.

2. Put liquid inlet pipes in the cleaning fluid, and start the machine for cleaning.

Related Products:

Electr Desktop Liquid Edible Oil Doubl Weigh Fill Drip Coffee Doy Pack Doughnut Double Head Paste Filling Machine Machinery


Recommend Products:

Precautions for Installation:

1. After unpacking the box, check whether the technical data with the equipment is complete and whether the equipment is damaged during the transportation so that all problems can be handled in time.

2. Install and adjust the feeding and discharging assembly as showed in the instruction manual.

3. Add new lubricating oil into every lubricating point.

4. There may be error in the actual filling. Use the measuring cylinder to measure it accurately before official filling.

FAQ:

1. What filling machines do you have?

A: Fully pneumatic filling machine and electric-pneumatic hybrid filling machine.

2. What products should be matched with it?

A: It need to be matched with an air compressor. (Customers can do it by themselves, and the recommended parameter is 1KW and 40L.) The products leave our factory with 1.5m high pressure hose (φ20).

3. Which industries can the products be used in?

A: The parts in contact with the materials is made of stainless steel 304 and the shell is made of stainless steel 201. All can also be made of stainless steel 316 as required by customers. The products is widely used in beverage, oil and vinegar, lubricating oil, toothpaste and cosmetics industry.

4. What kind of technical support can you provide?

A: The product are delivered as a whole, which can be used without assembly.

5. Does the product occupy a large land? Is it easy to operate?

A: The product in our company is an integrated equipment, occupying a small land, saving cost and easy to operate. The manual handle is used to regulate the filling volume, easy and simple to operate.

6. What kind of payment terms do you accept?

A: Normally we accept TT, Paypal, Western Union, Alibaba International Alipay and L/C. The exact term will be discussed in the deal.

7. How do you pack the products?

A: Non-fumigation wooden boxes are used for packaging.

Customer Service:

Pre-Sale Service

1. According to product's using condition, technicians will offer rationalization proposals to assist clients to select proper product types;

2. Provide detailed product performance description;

3. Provide professional quotation information;

4. Provide 24-hour technical consultation.

In-Sale Service

1. With supervision from the source of products, the qualified rate of raw materials entering the factory can reach 100%;

2. Whole manufacturing process are in strict accordance with promised procedure requirements, product qualified rate can reach 100%;

3. Provide product's inspection record of key junctures to customers;

4. Provide production schedule photos to customers at regular intervals;

5. Package and transport of products are in strict accordance with the export standard.

After-Sale Service

1. Under the premise of correct installation, normal maintenance and using, we guarantee one-year warranty period;

2. When warranty period has expired, our sold products enjoys lifetime guarantee repair, we only charge cost price for changing product's standard component and sealing component;

3. During installation and adjustment period, our after-sale service staff will communicate with customers frequently to know product's running state in time. Assist customers to install and adjust products until customers are satisfied.

Packing and Shipping: